Complete solutions, tailored to your needs Customize →
Home » Signal Management » Signal Jammers » Low Power Signal Jammers » ETLD-MD8X Low Power Signal Jammer | 22W 11-Band

ETLD-MD8X Low Power Signal Jammer | 22W 11-Band

Discover the ETLD-MD8X Low Power Signal Jammer. Featuring 22W output, 11 customizable bands, and approx. 45m² coverage for precise local security.

Application Scenarios: InfoSec & anti-leak, Order & anti-cheating, Prison & court comms control, EOD & anti-remote-detonation
Antenna Type External High-Gain Omni-Directional Antenna
Output Power 22W
Coverage Range Approx. 45m²
Number of Channels 11 Channels
Dimensions 420mm x 190mm x 90mm
Net Weight 4.2Kg

When you hear the term “Low Power Signal Jammer,” it’s easy to picture a basic device with very limited reach. The ETLD-MD8X, however, completely redefines what you can expect from this category. It is specifically engineered for venues that demand strict communication lockdown but cannot afford to disrupt neighboring buildings. By combining an operational radius of 1 to 20 meters with highly directional external antennas, this unit provides surgical precision. It is encased in a rugged, wear-resistant metallic shell that can easily withstand the demands of daily use in exam halls, confidential boardrooms, or private government offices.

ETLD-MD8X Low Power Signal Jammer | 22W 11-Band

Engineered for Endless Operation

Many jammers suffer from overheating when running for extended periods, leading to sudden failure. The ETLD-MD8X tackles this common pain point head-on. It utilizes a robust thermal management architecture that pairs a heavy-duty heat sink with dual active cooling fans. This setup guarantees the device can run non-stop for 24 hours without experiencing any performance degradation. Furthermore, the inclusion of an explosion-proof circuit design significantly reduces safety risks associated with power fluctuations. You can install this unit in a critical area and trust that it will maintain steady operation without constant babysitting.

Granular Power and Range Adjustments

Flexibility is where this hardware truly shines. Instead of blasting at full capacity the moment you turn it on, the ETLD-MD8X Signal Jammer outputs a total of 22W and lets you micro-adjust the power for all 11 independent channels. You have full control over the shielding distance, allowing you to fine-tune it between 1 and 20 meters. This granular control means you can target a specific room while keeping signal spillover to an absolute minimum. Pair this with the 11 external high-gain omni-directional antennas, and you get a uniform signal distribution that ensures there are no weak spots or blind zones.

Broad Spectrum Coverage in a Localized Area

Under standard testing conditions (RSRPK > -75dBm and received signal power < -95dBm), this device covers a focused area of roughly 45 square meters. It divides its output into 11 distinct frequency bands, accommodating standard 2G, 3G, 4G, and 5G networks. From the 730MHz range all the way up to 5000MHz, it handles major carrier bands with ease. Because it relies on imported chipsets, it maintains consistent performance and signal integrity over long periods. It is a remarkably capable setup given its compact dimensions of 420mm by 190mm by 90mm and a net weight of just 4.2kg.

Tailored to Your Specific Environment

No two radio frequency environments are exactly the same. Recognizing this, the ETLD-MD8X Low Power Signal Jammer offers full frequency support customization. You can collaborate with the manufacturer to adjust the specific signal shielding bands to match your exact local needs. Rather than paying for standard frequencies you will never encounter, you get a highly efficient solution designed specifically for your site. This customization ensures precise signal management and allows you to achieve your security goals with minimal effort and maintenance.

ParameterSpecificationNotes
Antenna TypeExternal High-Gain Omni-Directional AntennaProvides uniform signal coverage without blind spots.
Output Power22WDelivers robust, adjustable interference.
Coverage RangeApprox. 45m²Tested under specific conditions (RSRPK > -75dBm, received power < -95dBm).
Number of Channels11 ChannelsFrequency division for major 2G/3G/4G/5G networks.
Dimensions420mm x 190mm x 90mmCompact chassis for easy local deployment.
Net Weight4.2KgSolid build with a metallic casing.
Frequency Bands870-880MHz, 1800-1920MHz, 925-965MHz, 2005-2035MHz, 2110-2175MHz, 2400-2500MHz, 2300-2390MHz, 2550-2660MHz, 730-800MHz, 3400-3600MHz, 4800-5000MHzWide spectrum coverage across 11 distinct bands.
Cooling SystemHeatsink + Dual FansSupports continuous 24-hour operation.
Safety DesignExplosion-Proof CircuitPrevents power-related hazards during operation.
CustomizationFrequency SupportCustomizable bands based on specific client requirements.

What exactly is the ETLD-MD8X?

It is a high-precision, 11-channel low power signal jammer designed to block wireless communications in localized areas.

Can it run continuously without shutting down?

Yes, thanks to its dual-fan cooling system and heatsink, it is built for 24/7 operation.

Does it use internal or external antennas?

It uses 11 external high-gain omni-directional antennas to ensure comprehensive coverage.

Will it interfere with rooms outside my target area?

Because it is a localized low power device with a 1-20 meter range, interference outside the target zone is minimized.

How much power does it draw?

The device has a total output power of 22W.

Can I adjust the power for individual bands?

Yes, the power for each of the 11 channels can be micro-adjusted independently.

Is the outer shell durable?

Absolutely. It features a rugged metallic outer shell that resists wear and tear.

What type of safety mechanisms are included?

It features an explosion-proof circuit design to ensure safe operation during power fluctuations.

Is 5G network blocking supported?

Yes, the 11 frequency bands cover major 2G, 3G, 4G, and 5G carrier networks.

Can the frequencies be customized?

Yes, the manufacturer offers frequency customization to match your local RF environment.