Outdoor Signal Amplifiers: A Practical Buyer’s Guide
Learn how outdoor signal amplifiers improve weak mobile coverage, which specs matter, and how to plan a compliant, low-maintenance installation.
Get the ETLD-SA08 WiFi signal amplifier. Features 20W tri-band output (915M/2.4G/5.8G), 45dBm power, triple antenna, and cast aluminum body. Enhance your drone link.
The WiFi signal amplifier is a critical component for any professional drone pilot. The ETLD-SA08 model from DRAKON takes connectivity to the next level. It operates on three distinct frequencies: 915MHz, 2.4GHz, and 5.8GHz. With a massive 20W output, it ensures your unmanned aerial vehicle stays connected. This device is housed in a tough cast aluminum and ABS casing. It is engineered to deliver reliable performance in challenging environments.

Finding a versatile WiFi signal amplifier can be difficult. The ETLD-SA08 solves this by supporting 915MHz, 2.4GHz, and 5.8GHz bands. It features a directional tri-frequency and triple antenna output. This design focuses the amplified signal directly toward your drone. It is explicitly built for remote control of unmanned aerial vehicles. Whether you are flying in dense urban areas or remote landscapes, this amplifier maintains a robust link.
The technical capabilities of this WiFi signal amplifier are highly impressive. It delivers 30W (45dBm) on the 915MHz band and 20W (43dBm) on both the 2.4GHz and 5.8GHz bands. The transmit and receive gains range from 20 to 25dB. This ensures both outgoing commands and incoming telemetry are amplified effectively. The noise figure is kept low at ≤3.5dB typical. It supports IEEE 802.11 b/g/n/a/ac standards. Channel widths of 20MHz, 40MHz, and 80MHz are available. The input power ranges from 0 to 20dBm. The N-K female input terminal provides a secure connection. Following FCC guidelines for RF equipment, this device is designed to maximize range safely.
Durability is a key feature of this WiFi signal amplifier. It uses a combination of cast aluminum and ABS plastic for the housing. It weighs 6.5kg and measures 360mm x 378.5mm x 78mm. This substantial build ensures stability during field operations. Power is supplied via a 28V/10A DC adapter with a wide 100-240V input. The internal 21.6V 4000mA (86.4Wh) battery provides portable operation. Power status and activity status LEDs keep you informed at a glance.
This WiFi signal amplifier is built to endure harsh weather. It operates effectively in temperatures ranging from -20°C to +65°C. It tolerates up to 75% relative humidity. The cast aluminum housing aids in heat dissipation. This prevents the internal components from overheating during long flight sessions. The rugged construction protects sensitive electronics from dust and moisture. This resilience ensures you can focus on the flight, not the gear.
When you order the ETLD-SA08 WiFi signal amplifier, the box includes the amplifier, a power supply, and a user manual. You get everything needed for a quick setup.
Enhancing your drone’s range is simple with the right equipment. The ETLD-SA08 WiFi signal amplifier offers reliable performance and rugged durability. Its tri-band support and high-gain antennas make it a top choice for UAV operators. Upgrade your setup today and enjoy a stronger, more stable connection. Say goodbye to signal dropouts and fly with confidence.
| Parameter | Specification | Notes |
| Operating range | 902MHz~928MHz; 2.4~2.5GHz; 5.0~5.8GHz | Tri-band coverage |
| Output power | 915MHz/30W(45dBm); 2.4GHz/20W(43dBm); 5.8GHz/20W(43dBm) | High power output |
| Channel width | 20MHz&40MHz&80MHz | Flexible bandwidth |
| Supported standards | IEEE 802.11 b/g/n/a/ac | Wide compatibility |
| Operation mode | Bi-directional, half-duplex, TDD | Efficient transmission |
| Antenna | 2400-2500 14±1dBi; 5150-5350/5700-5900MHz 16±1dBi | High gain |
| Input terminal connector type | N-K female | Secure connection |
| Input power | 0~20dBm | Safe input range |
| Transmit gain | 20~25dB | Strong amplification |
| Receiver gain | 20~25dB | Clear reception |
| Noise figure | ≤3.5dB typical | Low noise |
| Frequency response | ±1dB over operating range | Stable signal |
| Power adapter | 28V/10A DC, 100~240V | Universal power |
| Operating temperature | -20°C to +65°C | Weather resistant |
| Operating humidity | Up to 75% relative humidity | Moisture tolerant |
| Material | Cast aluminum + ABS | Durable casing |
| LED light | Power status LED and activity status LED | Easy monitoring |
| Booster weight | 6.5kg | Heavy-duty build |
| Booster size | 360mm x 378.5mm x 78mm | Substantial footprint |
| Battery | Internal 21.6V 4000mA(86.4Wh) | Long-lasting power |