Complete solutions, tailored to your needs Customize →
Home » Signal Management » Signal Amplifier » 4W signal amplifier for UAVs – ETLD-SA02

4W signal amplifier for UAVs – ETLD-SA02

Get the ETLD-SA02 signal amplifier. Features 4000mW output, 2.4/5.8GHz dual-band, 14dBi antenna, and cast aluminum body. Enhance your drone link.

Application Scenarios: Indoor/underground coverage, Remote & weak-signal coverage, Building & venue signal boost, Mobile signal assurance
Operating range 2.4~2.5GHz; 5.0~5.8GHz
Output power 4000mW (36dBm)
Antenna 2400-2500 14±1dBi; 5150-5350/5700-5900MHz 16±1dBi
Transmit gain 16~19dB
Receiver gain ≤12dB
Operating temperature -40°C to +70°C

The signal amplifier is a vital accessory for professional drone operations. The ETLD-SA02 model is designed to dramatically extend the range of your UAV remote control. By amplifying both 2.4GHz and 5.8GHz signals, it ensures a robust connection. With a maximum output power of 4000mW, it cuts through interference. Built with a rugged cast aluminum chassis, it is ready for any outdoor adventure. Let’s dive into what makes this device an essential addition to your flight kit.

4W signal booster ETLD-SA02

Why You Need This signal booster

Drone pilots often face signal interference. A reliable signal amplifier solves this problem. The ETLD-SA02 supports dual-band frequencies (2.4GHz and 5.8GHz). It features a directional dual-frequency dual-antenna output. This focuses the amplified signal directly toward your drone. Whether you are flying in urban areas or open fields, this device maintains the link. It is specifically optimized for remote control of unmanned aerial vehicles. The directional antennas ensure that the boosted power is not wasted but targeted precisely where it is needed most. This results in a more stable and secure flight.

Core RF Capabilities of the signal booster

The technical specs of the ETLD-SA02 are robust. It supports IEEE 802.11b/g/n/a/ac standards. The channel width includes 20MHz, 40MHz, and 80MHz options. The transmit gain ranges from 16 to 19dB, while the receiver gain is ≤12dB. The noise figure is kept low at ≤3.5dB typical. The frequency response is stable at ±1dB over the operating range. The antenna gain is 14±1dBi for 2400-2500MHz and 16±1dBi for 5150-5350/5700-5900MHz. It utilizes an N-K female input terminal. The input power ranges from 0 to 20dBm. This means it handles standard controller outputs safely. For more details on RF safety and regulations, check out the FCC guidelines. The operation mode is bi-directional, half-duplex, time division duplex, ensuring efficient data flow.

Design and Power of the signal booster

Durability is crucial for field equipment. The ETLD-SA02 signal amplifier uses a cast aluminum material. It weighs 2.25kg and measures 198mm x 182mm x 46mm. This compact size makes it easy to mount on tripods or RC controllers. It runs on a 12V/2A DC power adapter with a wide 100~240V input. This means you can use it internationally without a voltage converter. The internal 10.8V 4000mA (43.2Wh) battery provides portable power. A battery level display keeps you informed about the remaining charge. For a smaller alternative, check out our ETLD-SA04 signal amplifier. The battery display is a thoughtful addition, preventing unexpected shutdowns mid-flight.

Environmental Endurance of the signal booster

This signal amplifier operates in extreme conditions. The operating temperature ranges from -40°C to +70°C. It handles up to 75% relative humidity. You can rely on it in freezing mountains or hot deserts. The cast aluminum construction helps dissipate heat efficiently. This ensures the internal components do not overheat during long flight sessions. It is truly built to survive the elements.

What’s in the Box

When you purchase the ETLD-SA02, the package includes the 4W drone signal amplifier, one power supply, and one user manual. The manual provides clear instructions for a quick setup. You don’t need any additional tools or complex configurations to get started. Everything you need is right there in the box.

Final Thoughts

Enhancing your drone’s range is simple with the right equipment. The ETLD-SA02 signal amplifier offers reliable performance and rugged durability. Its dual-band support and high-gain antennas make it a top choice for UAV operators. Upgrade your setup today and enjoy a stronger, more stable connection. Say goodbye to signal dropouts and fly with confidence.

ParameterSpecificationNotes
Operating range2.4~2.5GHz; 5.0~5.8GHzDual band support
Output power4000mW (36dBm)High power output
Channel width20MHz&40MHz&80MHzFlexible bandwidth
Supported standardsIEEE 802.11 b/g/n/a/acWide compatibility
Operation modeBi-directional, half-duplex, TDDEfficient transmission
Antenna2400-2500 14±1dBi; 5150-5350/5700-5900MHz 16±1dBiHigh gain
Input terminal connector typeN-K femaleSecure connection
Input power0~20dBmSafe input range
Transmit gain16~19dBStrong amplification
Receiver gain≤12dBClear reception
Noise figure≤3.5dB typicalLow noise
Frequency response±1dB over operating rangeStable signal
Power adapter12V/2A DC, 100~240VUniversal power
Operating temperature-40°C to +70°CExtreme weather ready
Operating humidityUp to 75% relative humidityMoisture resistant
MaterialCast aluminumDurable casing
Battery displayBattery level displayConvenient monitoring
Booster weight2.25kgSolid build
Booster size198mm x 182mm x 46mmCompact design
BatteryInternal 10.8V 4000mA(43.2Wh)Long-lasting battery

What is the maximum output power of this device?

It delivers a maximum of 4000mW (36dBm) for strong signal penetration.

Does it support both 2.4GHz and 5.8GHz frequencies?

Yes, it operates on both bands, making it versatile for different drone controllers.

What kind of battery is inside?

It features an internal 10.8V 4000mA (43.2Wh) battery with a level display.

Can it withstand extreme cold?

Absolutely, it functions in temperatures as low as -40°C.

What is the weight of the amplifier?

The booster weighs approximately 2.25kg.

What connector type does the input use?

It uses an N-K female connector for secure attachment.

Is this amplifier directional?

Yes, it utilizes directional dual-frequency dual-antenna output.

What is included in the package?

The package includes the amplifier, a power supply, and a user manual.