Complete solutions, tailored to your needs Customize →
Home » Signal Management » Signal Amplifier » Boost UAV Control: WiFi signal amplifier ETLD-SA08

Boost UAV Control: WiFi signal amplifier ETLD-SA08

Get the ETLD-SA08 WiFi signal amplifier. Features 20W tri-band output (915M/2.4G/5.8G), 45dBm power, triple antenna, and cast aluminum body. Enhance your drone link.

Application Scenarios: Indoor/underground coverage, Remote & weak-signal coverage, Building & venue signal boost, Mobile signal assurance
Operating range 902MHz~928MHz; 2.4~2.5GHz; 5.0~5.8GHz
Output power 915MHz/30W(45dBm); 2.4GHz/20W(43dBm); 5.8GHz/20W(43dBm)
Antenna 2400-2500 14±1dBi; 5150-5350/5700-5900MHz 16±1dBi
Transmit gain 20~25dB
Receiver gain 20~25dB
Operating temperature -20°C to +65°C

The WiFi signal amplifier is a critical component for any professional drone pilot. The ETLD-SA08 model from DRAKON takes connectivity to the next level. It operates on three distinct frequencies: 915MHz, 2.4GHz, and 5.8GHz. With a massive 20W output, it ensures your unmanned aerial vehicle stays connected. This device is housed in a tough cast aluminum and ABS casing. It is engineered to deliver reliable performance in challenging environments.

WiFi signal amplifier ETLD-SA08

Why the ETLD-SA08 WiFi signal amplifier Stands Out

Finding a versatile WiFi signal amplifier can be difficult. The ETLD-SA08 solves this by supporting 915MHz, 2.4GHz, and 5.8GHz bands. It features a directional tri-frequency and triple antenna output. This design focuses the amplified signal directly toward your drone. It is explicitly built for remote control of unmanned aerial vehicles. Whether you are flying in dense urban areas or remote landscapes, this amplifier maintains a robust link.

RF Performance of the WiFi signal amplifier

The technical capabilities of this WiFi signal amplifier are highly impressive. It delivers 30W (45dBm) on the 915MHz band and 20W (43dBm) on both the 2.4GHz and 5.8GHz bands. The transmit and receive gains range from 20 to 25dB. This ensures both outgoing commands and incoming telemetry are amplified effectively. The noise figure is kept low at ≤3.5dB typical. It supports IEEE 802.11 b/g/n/a/ac standards. Channel widths of 20MHz, 40MHz, and 80MHz are available. The input power ranges from 0 to 20dBm. The N-K female input terminal provides a secure connection. Following FCC guidelines for RF equipment, this device is designed to maximize range safely.

Power and Physical Design of the WiFi signal amplifier

Durability is a key feature of this WiFi signal amplifier. It uses a combination of cast aluminum and ABS plastic for the housing. It weighs 6.5kg and measures 360mm x 378.5mm x 78mm. This substantial build ensures stability during field operations. Power is supplied via a 28V/10A DC adapter with a wide 100-240V input. The internal 21.6V 4000mA (86.4Wh) battery provides portable operation. Power status and activity status LEDs keep you informed at a glance.

Operating Environment of the WiFi signal amplifier

This WiFi signal amplifier is built to endure harsh weather. It operates effectively in temperatures ranging from -20°C to +65°C. It tolerates up to 75% relative humidity. The cast aluminum housing aids in heat dissipation. This prevents the internal components from overheating during long flight sessions. The rugged construction protects sensitive electronics from dust and moisture. This resilience ensures you can focus on the flight, not the gear.

Package Contents

When you order the ETLD-SA08 WiFi signal amplifier, the box includes the amplifier, a power supply, and a user manual. You get everything needed for a quick setup.

Final Thoughts

Enhancing your drone’s range is simple with the right equipment. The ETLD-SA08 WiFi signal amplifier offers reliable performance and rugged durability. Its tri-band support and high-gain antennas make it a top choice for UAV operators. Upgrade your setup today and enjoy a stronger, more stable connection. Say goodbye to signal dropouts and fly with confidence.

ParameterSpecificationNotes
Operating range902MHz~928MHz; 2.4~2.5GHz; 5.0~5.8GHzTri-band coverage
Output power915MHz/30W(45dBm); 2.4GHz/20W(43dBm); 5.8GHz/20W(43dBm)High power output
Channel width20MHz&40MHz&80MHzFlexible bandwidth
Supported standardsIEEE 802.11 b/g/n/a/acWide compatibility
Operation modeBi-directional, half-duplex, TDDEfficient transmission
Antenna2400-2500 14±1dBi; 5150-5350/5700-5900MHz 16±1dBiHigh gain
Input terminal connector typeN-K femaleSecure connection
Input power0~20dBmSafe input range
Transmit gain20~25dBStrong amplification
Receiver gain20~25dBClear reception
Noise figure≤3.5dB typicalLow noise
Frequency response±1dB over operating rangeStable signal
Power adapter28V/10A DC, 100~240VUniversal power
Operating temperature-20°C to +65°CWeather resistant
Operating humidityUp to 75% relative humidityMoisture tolerant
MaterialCast aluminum + ABSDurable casing
LED lightPower status LED and activity status LEDEasy monitoring
Booster weight6.5kgHeavy-duty build
Booster size360mm x 378.5mm x 78mmSubstantial footprint
BatteryInternal 21.6V 4000mA(86.4Wh)Long-lasting power

What makes this device a tri-band amplifier?

It supports three distinct frequencies: 915MHz, 2.4GHz, and 5.8GHz, making it highly versatile.

How powerful is the ETLD-SA08?

It delivers 30W on 915MHz and 20W on both 2.4GHz and 5.8GHz, reaching up to 45dBm.

Does it come with a battery?

Yes, it features an internal 21.6V 4000mA battery rated at 86.4Wh for portable use.

What is the weight of the booster?

The unit weighs 6.5kg, providing a stable and solid build.

Can it operate in extreme heat?

It functions safely in temperatures up to +65°C and down to -20°C.

What kind of connector does the input use?

It utilizes a standard N-K female connector for secure RF connections.

What are the dimensions of the device?

The physical size is 360mm x 378.5mm x 78mm.

What is included in the box?

The package contains the 20W amplifier, a power supply, and a user manual.