Complete solutions, tailored to your needs Customize →
Home » Anti-Drone Systems » Drone Jammers » Vehicle Mounted » Vehicle-Mounted Anti-Drone Jammer ETLD-V044 | 900M-5.8GHz

Vehicle-Mounted Anti-Drone Jammer ETLD-V044 | 900M-5.8GHz

ETLD-V044 Vehicle-Mounted Anti-Drone Jammer: 900M/1.5G/2.4G/5.8GHz, 4x50W, 0-300m omni, DC12V/DC28V, 3m handle, waterproof.

Application Scenarios: Event Security, Law Enforcement, Military Defense, VIP Protection
Jamming Frequency 900M / 1.5G / 2.4G / 5.8GHz
Jamming Channels 4
Jamming Radius 0–300 m
Output Power 50W per band
Power Supply DC12V / DC28V
Control 3 m control handle

The ETLD-V044 is a vehicle-mounted anti-drone jammer box designed for mobile security work. It uses four standard bands: 900M, 1.5G, 2.4G, and 5.8GHz. Each band runs at 50W. The system provides omnidirectional jamming with a rated radius of 0–300 meters. It accepts DC12V or DC28V vehicle power and comes with a 3-meter control handle. The housing is waterproof. Custom frequencies are available for special projects.

Vehicle-Mounted Anti-Drone Jammer ETLD-V044 | 900M-5.8GHz

A Box for Vehicles, Not a Handheld Tool

This model is built as a jammer box. It is not a handheld shield. That difference matters. A box can be mounted on a roof rack, light bar, or rear platform. Once installed, it works around the vehicle without an operator aiming it. This suits patrol cars, SUVs, trucks, and armored vehicles. The waterproof structure helps it handle rain and dust on long routes. For teams that protect moving assets, this format is more practical than a fixed site system.

Four Bands and Four Channels

The ETLD-V044 covers 900M, 1.5G, 2.4G, and 5.8GHz. It has four channels, one for each band. Each channel delivers 50W. The 2.4G and 5.8GHz bands are widely used by commercial drones for control and video. The 900M and 1.5G bands can address other links, including telemetry or navigation-related signals. Because the four bands are independent, operators can run the full set or selected channels. Custom bands can be added when a project requires different coverage.

Range and Real-World Performance

The rated jamming radius is 0–300 meters. This is an omnidirectional figure, so the signal spreads around the vehicle. In open areas with clear line of sight, results are best. Buildings, hills, trees, and even the vehicle body can reduce range. Drone altitude also changes performance. A drone high above may behave differently from one at a low angle. Installers should place antennas away from metal surfaces and keep cable runs short. Testing on the actual vehicle is strongly recommended.

Power, Control, and Installation

The system runs on DC12V or DC28V. That covers many cars, trucks, and special vehicles. Because each band is 50W, the total current draw can be high. Check the vehicle alternator, battery, and wiring before installation. The 3-meter control handle lets an operator switch the jammer on and off from inside the cab or nearby. A qualified technician should handle grounding and antenna placement. Poor installation can reduce range or damage the system.

Where It Helps

Vehicle-mounted anti-drone jammers are used for border patrols, prison transfers, airport perimeter checks, VIP convoys, military routes, and critical infrastructure patrols. The ETLD-V044 gives these teams a moving protection zone. It does not replace legal approval or trained staff. Jamming is restricted in many countries. Buyers must confirm that operation is allowed in their area. The device is a controlled security tool, not a consumer product.

Practical Limits to Keep in Mind

No jammer can stop every drone. Results depend on frequency, power, distance, terrain, and the drone’s design. The 0–300 meter rating is a best-case figure. Rain, buildings, and radio interference can lower it. The waterproof housing is not meant for deep immersion. Check seals, cables, and connectors often. Keep a maintenance log. If a drone does not respond, reposition the vehicle or switch to a different channel combination.

Final Thoughts

The Vehicle-Mounted Anti-Drone Jammer ETLD-V044 combines four 50W bands, omnidirectional 0–300 meter coverage, DC12V/DC28V input, a 3-meter control handle, and a waterproof box. It is aimed at authorized teams that need mobile anti-drone protection. With correct installation, legal use, and realistic expectations, it can be a useful part of a wider security plan.

ParameterSpecificationNotes
ModelETLD-V044Vehicle-Mounted Anti-Drone Jammer
Jamming Frequency900M / 1.5G / 2.4G / 5.8GHzCustomizable
Jamming Channels4One channel per band
Jamming Radius0–300 mOmnidirectional
Output Power50W per band900M, 1.5G, 2.4G, 5.8GHz each 50W
Power SupplyDC12V / DC28VVehicle power input
Control3 m control handleRemote on/off control
StructureWaterproofOutdoor use; not for deep immersion
Product TypeVehicle-Mounted Anti-Drone JammerJammer box

What is the ETLD-V044?

It is a vehicle-mounted anti-drone jammer box with four bands and omnidirectional coverage.

Which frequency bands does it use?

It uses 900M, 1.5G, 2.4G, and 5.8GHz. Custom options are possible.

How many jamming channels are available?

There are four channels, one for each standard band.

What is the output power?

Each band provides 50W.

What is the jamming radius?

The rated omnidirectional radius is 0–300 meters.

Does it require aiming?

No. Its omnidirectional design spreads jamming around the vehicle.

What power input does it accept?

It runs on DC12V or DC28V.

How is it controlled?

It comes with a 3-meter control handle.

Is the housing waterproof?

Yes, it is waterproof for outdoor use, but it should not be submerged deeply.

Can it be mounted on any vehicle?

Many vehicles can carry it if there is enough mounting space and electrical capacity.

Is jamming always legal?

No. Rules vary by country, so authorization must be checked before use.

Can it stop every drone?

No. Performance depends on frequency, power, distance, terrain, and the drone's design.