Complete solutions, tailored to your needs Customize →
Home » Anti-Drone Systems » Drone Jammer Modules » 30W » Pro 30W Lora FPV Jammer Module ETLD-JM0809G30

Pro 30W Lora FPV Jammer Module ETLD-JM0809G30

Pro 30W Lora FPV jammer module ETLD-JM0809G30 covers 870-960MHz. 30W output, DC24-29V, 3.2A max, SMA female, built-in sweep source.

Application Scenarios: Correctional Facilities, Critical Infrastructure Protection, Event Security, Law Enforcement, Military Defense, VIP Protection
Frequency Band 870~960MHz
Output Power 30W
Efficiency ≥40%
Jammer Source Built-in high-speed sweep source
Dimensions 115.5*46.5*21mm
Weight 0.21kg

The 30W Lora FPV jammer module ETLD-JM0809G30 is a compact analog jamming unit for the 870–960MHz band. It combines a GaN amplifier with a built-in high-speed sweep source. That means no external signal generator is needed. You supply DC power and an antenna, and the module handles the rest.

Pro 30W Lora FPV Jammer Module ETLD-JM0809G30

What This Module Covers

This module targets 870–960MHz. That range is used by LoRa devices, FPV video links, and some remote controls. Output is 30W typical. VSWR is ≤2.0. With a matched antenna, it can disrupt those links while keeping the amplifier within safe limits.

Key Specs at a Glance

The module runs on DC24–29V and draws up to 3.2A. Efficiency is ≥40%. RF output uses an SMA female connector. It weighs 0.21kg and measures 115.5*46.5*21mm. Those numbers make it easy to fit into portable or fixed builds.

Frequency and Power

870–960MHz is a crowded slice of sub-1GHz spectrum. Many LoRa and FPV systems rely on it. Targeting this band means you do not waste energy elsewhere. The 30W output gives useful range for fixed sites and mobile kits.

Voltage and Current

Use a regulated DC supply. A 24V battery works if it holds voltage under load and can deliver 3.2A. Avoid spikes. They can damage the amplifier. For RF safety basics, see the FCC RF Safety Guidelines.

Why GaN Matters Here

GaN gives this 30W Lora FPV jammer module an efficiency of ≥40%. Less waste heat means smaller enclosures. Still, mount it to metal. Add airflow for long runs. If the case gets too hot, use a heatsink.

Control and RF Interface

Switch control is simple. +5V or floating turns it on. Ground turns it off. That works with microcontrollers and manual switches. The SMA female output is standard for sub-1GHz antennas. Keep coax short. A bad match raises VSWR and cuts range.

Mounting and Thermal Notes

The metal case has a small footprint. Use four screws or a clamp. Keep the antenna away from metal surfaces. If you mount it on a drone, watch payload weight. At 0.21kg, it is light, but cabling adds up.

Where It Fits

This module suits counter-UAV teams that need a ready 870–960MHz jamming path. Common uses include:

  • Prison and border protection

  • Portable inspection units

  • RF research and testing

  • Custom anti-drone platforms

Pair it with a detector. The detector finds the drone. The module blocks the link. Need another band? Compare our anti-drone module.

Why Choose This 30W Lora FPV Jammer Module

Many jammers need an external signal source. This one does not. The built-in high-speed sweep source saves space and wiring. The DC24–29V input and 3.2A max current are common in vehicle and battery systems. For counter-drone design context, see ITU unmanned aircraft resources. The small housing also helps where rack amplifiers will not fit.

Final Thoughts

The ETLD-JM0809G30 is a practical building block for 870–960MHz work. It offers 30W output, GaN efficiency, and a built-in sweep source in a small metal case. Confirm your frequency and power needs first. If 870–960MHz is right, this 30W Lora FPV jammer module is ready. Proper grounding, cooling, and antenna choice will get the best results.

ParameterSpecificationNotes
Frequency Band870~960MHzLoRa / FPV band
Output Power30WTypical
Output VSWR≤2.0Use matched antenna
Working VoltageDC24V~29VRegulated DC
Max Working Current3.2AAt 29V
Efficiency≥40%GaN design
Switch Control+5V or floating ON / ground OFFTTL-friendly
Output ConnectorSMA female50-ohm system
Jammer SourceBuilt-in high-speed sweep sourceNo external source
Dimensions115.5*46.5*21mmCompact housing
Weight0.21kgLightweight

What frequency range does this module cover?

It covers 870MHz to 960MHz. That range is often used for LoRa, FPV video, and remote control links.

Is the 30W output RMS or peak?

The specification lists 30W as a typical output power. Treat it as the module's rated RF output unless the manufacturer states otherwise.

Can I power it from a 24V battery?

Yes, if the battery delivers a stable voltage between DC24V and DC29V and can supply at least 3.2A. Avoid voltage spikes.

Does it need an external sweep generator?

No. The module includes a built-in high-speed sweep source. You only need DC power and a suitable antenna.

What antenna connector is used?

The RF output is an SMA female connector. Use a 50-ohm antenna with an SMA male connector for best results.

How do I turn the jammer on?

Apply +5V to the control pin or leave it floating. To turn it off, connect the control pin to ground.

Is a heatsink required?

A heatsink is not always mandatory, but it is recommended. Mount the module to metal and allow airflow, especially for long runs.

Can I use this module outdoors?

The module itself is a component, not a weatherproof enclosure. For outdoor use, install it inside a sealed, weather-resistant housing with proper thermal design.