Project Background
A power plant in Zunyi, Guizhou Province, required an expansion of its existing drone defense system to address evolving threats from unauthorized UAVs. The original system provided a baseline counter-drone capability, but the security team identified coverage gaps across several key frequency bands. The project objective was to enhance the existing infrastructure by integrating additional jamming modules rather than replacing the entire system. This approach protected the initial investment while adding multi-band disruption capabilities for 5.8GHz, sub-1GHz, and 3.4–3.6GHz drone links.

Operational Challenge
Power plants face diverse drone threats. Consumer drones commonly use 2.4GHz and 5.8GHz control and video links, while some industrial or modified UAVs rely on sub-1GHz bands such as 870–960MHz for LoRa-based control or FPV video. High-band links in the 3400–3600MHz range are also used by certain drone models and telemetry systems. The existing defense system covered some of these bands but lacked dedicated, high-power jamming paths for the full spectrum. The Zunyi plant needed a modular expansion that could be integrated into the current command and control architecture without major civil works or system downtime.
Solution Overview
The project deployed three types of GaN-based jamming modules, with ten units of each model. These modules were selected for their compact size, built-in sweep sources, and compatibility with the plant’s existing counter-drone platform.
ETLD-JM5758G20 — 20W GaN Jamming Module (5725–5850MHz)
This module targets the 5.8GHz band widely used by consumer drones for video and control. It delivers 20W output with efficiency ≥40%. The built-in high-speed sweep source eliminates the need for an external signal generator. Operating on DC24–29V at up to 2.5A, it measures 115.5×46.5×21mm and weighs 0.21kg. The SMA female output connects to standard 5.8GHz antennas. Switch control is simple: +5V or floating turns it on, grounding turns it off.
ETLD-JM0809G30 — 30W LoRa FPV Jammer Module (870–960MHz)
This module covers the sub-1GHz band used by LoRa devices, FPV video links, and some remote controls. It provides 30W output with efficiency ≥40% and a built-in sweep source. Power requirements are DC24–29V at up to 3.2A. The module shares the same compact 115.5×46.5×21mm footprint and 0.21kg weight as the 5.8GHz unit, simplifying mechanical integration.
ETLD-JM3436G80 — 80W GaN UAV Jammer Module (3400–3600MHz)
This high-power module addresses the 3400–3600MHz band used by certain drone control, video, and telemetry links. It delivers 80W output with efficiency ≥40% and includes absorption-type VSWR protection to safeguard the output stage. The built-in sweep source creates a wideband interference profile. It operates on DC24–29V at up to 10.0A and measures 168.5×84.5×23mm, weighing 0.55kg. The larger housing helps dissipate heat during continuous operation.
Deployed Products:
-
20W GaN Jamming Module 5725-5850MHz — ETLD-JM5758G20 × 10
-
30W LoRa FPV Jammer Module — ETLD-JM0809G30 × 10
-
80W GaN UAV Jammer Module 3400-3600MHz — ETLD-JM3436G80 × 10
Integration and Deployment
The modules were integrated into the plant’s existing drone countermeasure system. Because each module is a self-contained RF block requiring only DC power and a switch signal, integration involved mounting the units in the existing equipment racks, connecting DC power feeds, routing RF cables to external antennas, and linking the control lines to the system controller. The modular design allowed the plant to add new frequency bands without replacing the core platform.
The project team followed a structured integration process: site survey, antenna placement planning, power budget verification, module installation, control logic configuration, and full-system testing. Each module was tested with a dummy load before connecting to antennas. Antenna VSWR was checked across the operating band to protect the amplifiers. Thermal management was addressed by mounting the modules to metal chassis surfaces and ensuring adequate airflow around the 80W unit.
Operational Results and Data
After commissioning, the expanded system demonstrated reliable multi-band jamming capability. The 5.8GHz and 870–960MHz modules provided effective disruption of common drone control and video links within the designed coverage area. The 80W 3400–3600MHz module delivered strong output for high-band threats, with the built-in sweep source covering the full band. System operators reported that the integrated modules responded quickly to control commands and maintained stable performance during extended test runs. Thermal measurements confirmed that the 80W module operated within safe limits when mounted with proper heat sinking. The absorption-type VSWR protection proved effective during antenna mismatch testing, preventing damage to the output stage.
Project Value and Future Scalability
The Zunyi project demonstrates the value of modular counter-drone expansion. By adding drone jamming modules to an existing system, the plant achieved broader frequency coverage without the cost and disruption of a full replacement. The common control interface and compact form factor of the modules simplify future upgrades. If new drone threats emerge in other bands, additional modules can be integrated using the same power and control infrastructure. The plant now has a scalable defense architecture that can adapt to changing threat profiles while preserving existing investments.
Conclusion
The Zunyi power plant drone defense system expansion project successfully enhanced airspace security through the integration of ETLD-JM5758G20, ETLD-JM0809G30, and ETLD-JM3436G80 jamming modules. The project delivered multi-band coverage, reliable performance, and a clear path for future scalability. For critical infrastructure operators considering counter-drone upgrades, this case illustrates how modular GaN jamming technology can extend existing defenses efficiently and cost-effectively.
