7 Powerful China Portable Drone Jammer Insights
Explore China portable drone jammer options: RF bands, cooling, compliance, and sourcing tips. Compare suppliers with this 2026 buyer overview.
TLD-PJ04 Trolley Drone Jammer: custom 0.9/GPS/2.4/5.8GHz, 4 channels, 100W (5.8GHz 50W), omni 1000m, directional 2000m, 4 batteries, omni/directional antennas.
The ETLD-PJ04 is built into a trolley case. You pull it to a position, set it down, raise the antennas, and work from the handle. It is not a backpack and not a handheld shield. This is a unit that stays where it is placed, which suits gates, roof edges, temporary checkpoints and other spots where one person watches one approach.

The standard set is 0.9GHz, GPS, 2.4GHz and 5.8GHz. Four channels are provided. Frequencies can be customized, so a site facing a particular link can ask for a closer match instead of carrying bands it never uses. The handle has switches for each channel, letting the operator run all four or isolate the one that matters.
Two antennas come with the case. The omni antenna covers all around the unit and is quoted at 0–1000m. The directional panel pushes energy toward a chosen path and is quoted at 0–2000m. Start with omni to watch the area, then switch to directional once a bearing is known. Both figures assume a clear line; walls, hills and heavy rain reduce them.
Output is 100W on 0.9GHz, GPS and 2.4GHz. The 5.8GHz channel is 50W. That lower figure is worth remembering: 5.8GHz still transmits, but it will not match the reach of the 100W bands. For sites where 5.8GHz is the main concern, ask the supplier about options before ordering. The high wattage explains why a case unit can hold a longer range than many body-worn devices.
Four removable batteries are included. They can be swapped in the field, so a long watch does not stop when one cell runs down. The handle carries the channel switches; no laptop, phone or external controller is needed. The operator sets the bands, checks the antennas and leaves the unit running.
Place it on level ground. Keep the antennas clear of metal walls and vehicles. Pick omni or directional. Switch on only the bands you need, and keep friendly radios and Wi-Fi out of those bands or accept that they will be affected. The case is heavy enough to stay put in wind, but secure the antennas if the site is exposed.
Gatehouses, construction sites, event entries, prison perimeters and critical buildings are the usual uses. One operator can cover a gate or a roof edge. For a long perimeter, several cases or a mix of case and backpack units may work better. The trolley format moves easily between posts but is not made for stairs.
Custom frequencies must be confirmed before production. Omni range is half the directional figure. Jamming affects any device in the band, including friendly links. Local rules apply, and the case is a transmitting unit, so site coordination matters. Do not assume it is waterproof unless the supplier confirms the rating.
The ETLD-PJ04 drone jammer is a simple four-band, high-power case unit. Roll it in, choose the antenna, switch the bands and cover the approach.
| Parameter | Specification | Notes |
| Jamming frequency | Customizable; 0.9/GPS/2.4/5.8GHz | Four bands |
| Jamming range | Omni 0–1000m; directional 0–2000m | Best case |
| Channels | 4 | Handle switches |
| Battery | 4 × removable | Field swap |
| Antennas | Omni + directional | Both included |
| Output power | 100W on 0.9/GPS/2.4; 50W on 5.8GHz | Band dependent |
| Form factor | Trolley case | Pull and place |
| Control | Handle with switches | Any band on/off |