100W GaN Drone Jammer Module: Does GaN Deliver?
GaN promises efficiency and power density in 100W drone jammer modules. Here is where the gains are real, where they shrink, and what to verify.
100W GaN drone jammer module ETLD-JM1516G100: 1550-1620MHz, 100W output, DC24-29V, 12A, built-in sweep source, VSWR protection, SMA female.
If you are building counter-drone equipment, the 1.5 GHz band is often a priority. The ETLD-JM1516G100 is a 100W GaN drone jammer module designed for 1550~1620MHz. It delivers 100W output, runs on DC24V~29V, and includes a built-in high-speed sweep source. Instead of assembling separate parts, you get an analog all-in-one module with VSWR protection and a standard SMA female output.

This module targets 1550~1620MHz. That range is used by certain drone video, telemetry, and control links. With 100W output, it can work with directional antennas for sector coverage or point defense. The housing is compact at 168.5*84.5*23mm and weighs 0.55kg. Output VSWR is ≤2.0, so it matches common 50-ohm systems. The switch control accepts +5V or floating for ON, and ground for OFF.
GaN transistors handle high power density better than many older silicon parts. In a 100W GaN drone jammer module, that means less heat for the same output. The ETLD-JM1516G100 reaches ≥40% efficiency. It draws up to 12.0A at full power. Even with good efficiency, you should mount the module on a metal chassis or heatsink. Stable thermal design protects the amplifier and keeps output consistent.
You do not need an external signal generator. The built-in high-speed sweep source covers the full band. This simplifies rack design and reduces cable loss. The module also uses an absorption-type VSWR protection device. If the antenna is disconnected or poorly matched, reflected power is absorbed instead of damaging the GaN stage. For RF safety guidance, check the FCC RF exposure guidelines.
Control is straightforward. Apply +5V or leave the control pin floating to turn the unit ON. Ground the pin to turn it OFF. The RF output is an SMA female connector. Power input is DC24V~29V, with a maximum current of 12.0A. Use a regulated supply with headroom. For multi-band setups, pair this module with our 100W LoRa FPV jammer module for 870~960MHz.
Always connect a suitable antenna before powering the module. Keep cable loss low, especially at 1.5 GHz. A directional panel or Yagi can improve range and reduce unwanted radiation. Place the module on a heatsink with airflow if used continuously. Check local regulations before transmitting.
This 100W GaN drone jammer module suits OEMs, system integrators, and defense projects. It can be used in fixed stations, vehicle roofs, and portable cases. Because it is an analog all-in-one module, it cuts development time. You still need power, antenna, and control logic. For background on 1.5 GHz signals, see this overview of the Global Positioning System.
The ETLD-JM1516G100 combines 100W output, GaN efficiency, a built-in sweep source, and VSWR protection in a small package. If your project needs 1550~1620MHz jamming, this module is ready for integration.
| Parameter | Specification | Notes |
| Operating Frequency | 1550~1620MHz | Wideband coverage |
| Output Power | 100W | High power output |
| Output VSWR | ≤2.0 | Standard 50-ohm matching |
| Working Voltage | DC24V~29V | Standard industrial range |
| Max Working Current | 12.0A | At maximum output |
| Efficiency | ≥40% | GaN technology benefit |
| Switch Control | +5V or Floating (ON) / Ground (OFF) | Logic control |
| Output Connector | SMA Female | Standard RF interface |
| Jamming Source | Built-in High-Speed Sweep Source | Integrated source |
| VSWR Protection | Built-in Absorption Type | Protects amplifier |
| Dimensions | 168.584.523mm | Compact size |
| Weight | 0.55kg | Lightweight |