50W LoRa Drone Jammer Module: Design & Compliance
A practical industry overview of 50W LoRa drone jammer modules: RF design, thermal management, EMC, compliance, and authorized deployment.
50W LoRa FPV jamming module ETLD-JM0710L50: 720-1020MHz, 47±1dBm, 28V, 4.5A, built-in noise source, SMA female, 300g.
When you need a 50W LoRa FPV jamming module, the ETLD-JM0710L50 is built for the job. It covers 720-1020MHz, a band used by LoRa links, FPV video, and some telemetry systems. The module outputs 50W, runs on 28V, and includes a built-in high-speed noise modulation source. You do not need a separate signal generator. It is an analog all-in-one module for counter-drone work.

This module tunes across 720MHz to 1020MHz. Output power is 47±1dBm, which is about 50W. Input and output impedance is 50 ohms. Analog scan speed is 270KHz. Custom scan speeds from 100KHz to 500KHz are available. The design supports customization, so OEMs can adapt it for specific projects.
LoRa uses sub-GHz bands for long-range control. FPV video often shares nearby frequencies. Jamming this range can disrupt drone links. The module works from -20°C to +65°C. It uses an SMA female connector. LED indicators show power, overvoltage, and overtemperature. For RF safety, check the FCC RF exposure guidelines. For background on LoRa, see this LoRa overview.
You get a built-in high-speed noise modulation source. That saves rack space and reduces cable loss. If you need different modulation, you can order VCO, DDS, or SDR versions. The module also supports custom dimensions. This flexibility helps system integrators fit it into existing enclosures.
The module runs on 24V to 28V, with 28V nominal. Current draw is ≤3.2-4.5A at 50W output. Switch control is not listed as a separate pin, but the module has a power switch and status LEDs. Always use a regulated supply with enough headroom. Keep cables short to reduce voltage drop.
The standard size is 117*58*18mm. Weight is about 300g. The housing is compact and light. It can be mounted on vehicles, poles, or portable cases. The operating temperature range is -20°C to +65°C. For continuous use, mount it on a metal surface or heatsink. Good airflow helps stability.
This 50W LoRa FPV jamming module fits fixed stations, vehicle roofs, and portable jamming units. It can be paired with our 100W LoRa FPV jammer module for higher power, or with our 50W GaN drone jamming module for 5.8GHz coverage. Multi-band setups can cover more drone links. Always follow local laws before transmitting.
The ETLD-JM0710L50 gives you 50W output, 720-1020MHz coverage, a built-in noise source, and a small footprint. If your project needs a 50W LoRa FPV jamming module, this unit is ready for integration.
| Parameter | Specification | Notes |
| Operating Frequency | 720~1020MHz | Wideband coverage |
| Output Power | 47±1dBm (50W) | High power output |
| Working Voltage | 28V (24-28V) | Nominal 28V |
| Working Current | ≤3.2-4.5A | At 50W output |
| Analog Scan Speed | 270KHz | Customizable 100-500KHz |
| Dimensions | 117 x 58 x 18mm | Custom sizes available |
| Input Signal Source | Built-in High-Speed Noise Modulation | Custom VCO, DDS, SDR |
| Operating Temperature | -20~+65℃ | Normal operation |
| Connector | SMA Female | Standard RF interface |
| LED Indicators | Power, Overvoltage, Overtemperature | Status display |
| Weight | 300g | Lightweight |
| Customization | Supported | LoRa/LDMOS module options |