Complete solutions, tailored to your needs Customize →
Home » Anti-Drone Systems » Drone Jammer Modules » 50W » JM0607G50 50W Anti-Drone Jammer Module 600-700MHz

JM0607G50 50W Anti-Drone Jammer Module 600-700MHz

JM0607G50 50W anti-drone jammer module covers 600-700MHz with 47±1dBm output, 28V input, 270KHz scan, SMA female, and custom options.

Application Scenarios: Correctional Facilities, Critical Infrastructure Protection, Event Security, Law Enforcement, Military Defense, VIP Protection
Frequency range 600–700MHz
Operating voltage 28V
Operating current ≤3.2–4.5A
Output power 47±1dBm
Scanning speed 270KHz
Dimensions 117*58*18mm

The JM0607G50 is a 50W anti-drone jammer module built for 600–700MHz countermeasure work. It combines a GaN power stage with an internal high-speed noise modulation source, giving integrators a compact block for video transmission and signal shielding tasks. The module is aimed at OEM users who need stable RF output in a small housing, not a finished consumer device.

JM0607G50 50W Anti-Drone Jammer Module 600-700MHz

RF Path and Output

At the core is a 47±1dBm output stage, equivalent to about 50W. The 600–700MHz band is often used by analogue and digital video links, so the module can be paired with directional antennas or sector housings. GaN devices keep the package small while handling the thermal load. Output should be terminated correctly and never run without a suitable load or antenna.

Power and Control

The unit runs from 24–28V, with 28V as the nominal figure. Current draw is ≤3.2–4.5A depending on operating conditions and output setting. A built-in high-speed noise modulation source removes the need for an external baseband generator in many builds. For OEM projects, the source can be customized as VCO, DDS or SDR. LED status covers power, overvoltage and over-temperature.

Scanning and Integration

Scanning speed is 270KHz as standard, and 100–500KHz is available on request. That range helps systems cover different sweep patterns without changing the RF front end. The SMA female connector keeps cable choice simple. Measuring 117*58*18mm and weighing about 300g, the module fits handheld, vehicle and fixed installations where space is tight.

Thermal and Environmental Notes

Operating temperature is -20 to +65°C. Good thermal contact to the enclosure is important because 50W modules concentrate heat in a small area. Use a heatsink or metal chassis, keep airflow paths clear, and respect the over-temperature indicator. For outdoor housings, protect the SMA joint and manage condensation.

Customization for OEM Projects

The JM0607G50 can be adapted for different integration needs. Frequency range, scanning speed, signal source, connector layout and dimensions can be discussed. This makes the 50W anti-drone jammer module suitable for system builders who want a known RF block rather than a full box. Early discussions should cover antenna VSWR, duty cycle, power supply ripple and thermal design.

Why GaN Matters

GaN transistors tolerate higher power density than older silicon parts in the same footprint. In this 50W anti-drone jammer module, that helps keep the 117*58*18mm body practical while leaving room for the modulation board. The benefit is not just raw output; it also supports cleaner assembly and easier thermal coupling to a metal case. Integrators should still derate the module for continuous duty and check junction temperatures in the final housing.

Signal Source Choices

The standard input is an internal high-speed noise modulation source. Some projects prefer VCO, DDS or SDR control instead, and these can be quoted as options. The choice affects sweep shape, repeatability and interface design. Noise modulation is straightforward for wideband masking, while DDS and SDR offer more flexible patterns when the system needs defined steps or software control. Match the source to the mission and the available control board.

Mechanical and RF Installation

Mount the module on a flat metal surface using the fixing points shown in the final drawing. Keep the SMA female connector free of strain and use a short, low-loss cable where possible. Check VSWR before applying full power; a poor antenna can reflect energy back into the GaN stage. Add DC fuse and reverse-polarity protection in the host system. These small steps improve service life and reduce avoidable returns.

Before You Specify

Confirm the target band, required sweep rate and control interface before ordering. The 50W anti-drone jammer module is not a plug-and-play finished product; it needs a proper RF path, DC protection and mechanical support. Test with a power meter and suitable attenuator, not a direct receiver. Keep emissions within local rules and use the module only in authorized applications.

Ordering Notes

When requesting a quote for JM0607G50, state band, output, scan rate, source type, connector and housing needs. Custom work is easier when antenna gain and duty cycle are known. Samples can be discussed for qualified projects.

ParameterSpecificationNotes
Frequency range600–700MHzModule supports customization
Operating voltage28V24–28V
Operating current≤3.2–4.5AAt 50W output
Output power47±1dBm50W
Scanning speed270KHzCustomizable 100–500KHz
Input signal sourceBuilt-in high-speed noise modulation sourceCustomizable VCO, DDS, SDR
Operating temperature-20~+65℃Normal operation
ConnectorSMA female
LED indicatorsPower switch, overvoltage, over-temperature
Dimensions117*58*18mmCustomizable
Weight300g-

What frequency band does JM0607G50 cover?

It is made for 600–700MHz operation, and the band can be discussed for custom projects.

Is the output exactly 50W?

The nominal output is 47±1dBm. Real results depend on supply, temperature and antenna VSWR.

Can the module run from a 24V supply?

Yes. The accepted range is 24–28V, with 28V as the nominal value.

How much current should the host supply?

Plan for up to 4.5A and leave headroom for start-up and thermal conditions.

Does it need an external modulation board?

No for the standard version. It has a built-in high-speed noise source. VCO, DDS and SDR are options.

What connector is fitted?

The RF port uses an SMA female connector.

How should I cool the module?

Mount it to a metal chassis or heatsink, keep airflow clear, and watch the over-temperature LED.

Can the housing size be changed?

Yes. Dimensions and connector layout can be customized for OEM orders.

Is this a complete end-user jammer?

No. It is an OEM RF module that needs antenna, DC protection, control and mechanical integration.

What should be checked before first power-on?

Check antenna VSWR, load connection, supply polarity, fuse rating and thermal contact.