Project Background
An energy facility in Xinjiang required an expansion of its existing drone countermeasure system to close frequency coverage gaps identified during a security review. The original system provided baseline protection across common commercial drone bands, but it lacked dedicated jamming paths for sub-GHz LoRa and FPV links and for high-band 6900–7200MHz transmissions. Rather than replacing the platform, the facility chose a modular upgrade: five 60W LoRa FPV jamming modules and five 150W GaN jamming modules were purchased and integrated into the existing counter-drone architecture.

Operational Challenge
Energy sites in remote regions combine long perimeters, limited manpower, and harsh environmental conditions. The existing defense system was built around a modular rack architecture, which made expansion technically feasible, but the new bands introduced different requirements. Sub-GHz LoRa links can support long-range control and telemetry, while 6.9–7.2GHz links appear in certain high-band video and data systems. Uncovered bands represent a potential exploitation path. The facility needed modules that matched the existing DC power and switch-control interfaces, fit within available rack space, and could handle continuous operation without adding excessive heat load to the equipment room.
Solution Overview
ETLD-JM0404G60 — 60W LoRa FPV Jamming Module (5 units)
This compact analog jamming module targets LoRa and FPV links in the 400MHz range. It pairs a GaN output stage delivering 60W with a built-in high-speed sweep source, so the host system does not need to generate an RF signal. The metal housing and SMA output follow the same form factor as other modules in the product family, which simplified mechanical and RF integration.
ETLD-JM6972G150 — 150W GaN Jamming Module 6900–7200MHz (5 units)
This high-power module covers the 6900–7200MHz band with a 150W GaN output stage. It includes a built-in sweep source and output protection circuitry, and its larger housing is designed to spread heat during sustained operation. Switch control uses the same logic as the existing modules, allowing the facility to manage all units through the current controller.
Integration and Deployment
The modules were integrated into the existing counter-drone system in stages so that site security was never offline. The team first confirmed rack space, DC power budget, and control-line routing, then installed the modules and connected RF outputs to the existing antenna feeder system. Each unit was tested into a dummy load before going on air, and antenna VSWR was checked across the operating band. Thermal verification followed: the 150W units were mounted to metal chassis surfaces with thermal interface material, and airflow around the heat sink fins was confirmed before continuous-operation testing began.
Operational Results and Data
Commissioning tests produced consistent results. Bench measurements confirmed output power close to the rated 60W and 150W figures, and the built-in sweep function was verified across both bands. After connection to the antenna system, reflected power stayed within safe limits and no protection trips occurred. During a continuous run of more than one hour, module temperatures stabilized within the design range, and the 150W units showed no thermal drift in output. Operators reported that the new modules responded to control commands immediately and that the expanded system introduced no noticeable interference with facility communications during controlled tests. Alarm logs remained clean throughout the trial period.
Project Value and Future Scalability
The expansion preserved the facility’s original investment while adding two previously uncovered bands. Because the new modules share the existing power and control interfaces, future upgrades can follow the same pattern: identify the gap, select the module, and integrate. The rack layout and power budget still have headroom, and the thermal design was planned with additional load in mind. This gives the facility a practical, repeatable path to keep pace as drone link technologies evolve.
Conclusion
The Xinjiang energy facility drone defense system expansion demonstrates how modular GaN jamming technology can extend an existing counter-drone platform efficiently. By integrating the ETLD-JM0404G60 and ETLD-JM6972G150 drone jammer modules, the site achieved broader frequency coverage, stable field performance, and a clear route for future growth—without disrupting ongoing security operations.
