Complete solutions, tailored to your needs Customize →
Home » Anti-Drone Systems » Drone Jammer Modules » 50W » ETLD-JM0710L50: 50W LoRa FPV Jamming Module for 720-1020MHz

ETLD-JM0710L50: 50W LoRa FPV Jamming Module for 720-1020MHz

50W LoRa FPV jamming module ETLD-JM0710L50: 720-1020MHz, 47±1dBm, 28V, 4.5A, built-in noise source, SMA female, 300g.

Application Scenarios: Correctional Facilities, Critical Infrastructure Protection, Event Security, Law Enforcement, Military Defense, VIP Protection
Operating Frequency 720~1020MHz
Output Power 47±1dBm (50W)
Working Voltage 28V (24-28V)
Working Current ≤3.2-4.5A
Analog Scan Speed 270KHz
Input Signal Source Built-in High-Speed Noise Modulation

When you need a 50W LoRa FPV jamming module, the ETLD-JM0710L50 is built for the job. It covers 720-1020MHz, a band used by LoRa links, FPV video, and some telemetry systems. The module outputs 50W, runs on 28V, and includes a built-in high-speed noise modulation source. You do not need a separate signal generator. It is an analog all-in-one module for counter-drone work.

50W LoRa FPV Jamming Module 720-1020MHz

What the 50W LoRa FPV Jamming Module Covers

This module tunes across 720MHz to 1020MHz. Output power is 47±1dBm, which is about 50W. Input and output impedance is 50 ohms. Analog scan speed is 270KHz. Custom scan speeds from 100KHz to 500KHz are available. The design supports customization, so OEMs can adapt it for specific projects.

Why 720-1020MHz Matters for LoRa and FPV

LoRa uses sub-GHz bands for long-range control. FPV video often shares nearby frequencies. Jamming this range can disrupt drone links. The module works from -20°C to +65°C. It uses an SMA female connector. LED indicators show power, overvoltage, and overtemperature. For RF safety, check the FCC RF exposure guidelines. For background on LoRa, see this LoRa overview.

Built-In Noise Source and Custom Options

You get a built-in high-speed noise modulation source. That saves rack space and reduces cable loss. If you need different modulation, you can order VCO, DDS, or SDR versions. The module also supports custom dimensions. This flexibility helps system integrators fit it into existing enclosures.

Power and Control

The module runs on 24V to 28V, with 28V nominal. Current draw is ≤3.2-4.5A at 50W output. Switch control is not listed as a separate pin, but the module has a power switch and status LEDs. Always use a regulated supply with enough headroom. Keep cables short to reduce voltage drop.

Thermal and Mechanical Design

The standard size is 117*58*18mm. Weight is about 300g. The housing is compact and light. It can be mounted on vehicles, poles, or portable cases. The operating temperature range is -20°C to +65°C. For continuous use, mount it on a metal surface or heatsink. Good airflow helps stability.

Integration Ideas

This 50W LoRa FPV jamming module fits fixed stations, vehicle roofs, and portable jamming units. It can be paired with our 100W LoRa FPV jammer module for higher power, or with our 50W GaN drone jamming module for 5.8GHz coverage. Multi-band setups can cover more drone links. Always follow local laws before transmitting.

Final Thoughts

The ETLD-JM0710L50 gives you 50W output, 720-1020MHz coverage, a built-in noise source, and a small footprint. If your project needs a 50W LoRa FPV jamming module, this unit is ready for integration.

ParameterSpecificationNotes
Operating Frequency720~1020MHzWideband coverage
Output Power47±1dBm (50W)High power output
Working Voltage28V (24-28V)Nominal 28V
Working Current≤3.2-4.5AAt 50W output
Analog Scan Speed270KHzCustomizable 100-500KHz
Dimensions117 x 58 x 18mmCustom sizes available
Input Signal SourceBuilt-in High-Speed Noise ModulationCustom VCO, DDS, SDR
Operating Temperature-20~+65℃Normal operation
ConnectorSMA FemaleStandard RF interface
LED IndicatorsPower, Overvoltage, OvertemperatureStatus display
Weight300gLightweight
CustomizationSupportedLoRa/LDMOS module options

What is the frequency range of the ETLD-JM0710L50?

It operates from 720MHz to 1020MHz.

How much RF power does this module produce?

It delivers 47±1dBm, which is approximately 50W.

Does it need an external signal generator?

No. It has a built-in high-speed noise modulation source.

Can the scan speed be changed?

Yes. The standard is 270KHz, and custom speeds from 100KHz to 500KHz are available.

What power supply is required?

Use 24V to 28V DC, with 28V nominal. Current draw is ≤3.2-4.5A at 50W output.

What connector is used for RF output?

The RF output uses an SMA female connector.

What do the LED indicators show?

They show power, overvoltage, and overtemperature status.

Is the module customizable?

Yes. Custom dimensions, VCO, DDS, SDR, and LoRa/LDMOS module options are supported.