Complete solutions, tailored to your needs Customize →
Home » Anti-Drone Systems » Drone Jammer Modules » 20W » Ultimate 20W GaN Jamming Module 5725-5850MHz

Ultimate 20W GaN Jamming Module 5725-5850MHz

This 20W GaN jamming module ETLD-JM5758G20 covers 5725-5850MHz with 20W output, DC24-29V, 2.5A max, SMA female, and a built-in sweep source.

Application Scenarios: Correctional Facilities, Critical Infrastructure Protection, Event Security, Law Enforcement, Military Defense, VIP Protection
Frequency Band 5725~5850MHz
Output Power 20W
Efficiency ≥40%
Jammer Source Built-in high-speed sweep source
Dimensions 115.5*46.5*21mm
Weight 0.21kg

If you need a compact jamming path for the 5.8GHz band, the 20W GaN jamming module ETLD-JM5758G20 is worth a look. It covers 5725–5850MHz and packs a built-in sweep source. That means no external oscillator. You supply DC power and an antenna, and the module does the rest.

Ultimate 20W GaN Jamming Module 5725-5850MHz

What It Does

This is an integrated analog jammer, not just an amplifier. The 5725–5850MHz range is used by many drones for video and control. Output is 20W typical. VSWR is ≤2.0. With a matched antenna, it can disrupt those links while keeping the amplifier safe.

Main Specs

The module runs on DC24–29V and draws up to 2.5A. Efficiency is ≥40%. RF output is SMA female. It weighs 0.21kg and measures 115.5*46.5*21mm. Those numbers make it easy to fit into portable or pole-mounted builds.

Frequency and Power

5725–5850MHz is a crowded slice of 5.8GHz. Many consumer drones use it. Targeting this band means you do not waste energy elsewhere. The 20W output gives useful range for fixed sites and mobile kits.

Voltage and Current

Use a regulated DC supply. A 24V battery works if it holds voltage under load and can deliver 2.5A. Avoid spikes. They can kill the amplifier. For RF safety basics, see the FCC RF Safety Guidelines.

GaN Efficiency and Heat

GaN gives this 20W GaN jamming module an efficiency of ≥40%. Less heat means smaller enclosures. Still, mount it to metal. Add airflow for long runs. If the case gets too hot, use a heatsink.

Control and RF Hookup

Switch control is simple. +5V or floating turns it on. Ground turns it off. That works with microcontrollers and manual switches. The SMA female output is standard for 5.8GHz antennas. Keep coax short. A bad match raises VSWR and cuts range.

Mounting and Integration

The metal case has a small footprint. Use four screws or a clamp. Keep the antenna away from metal surfaces. If you mount it on a drone, watch payload weight. At 0.21kg, it is light, but cabling adds up.

Antenna Selection

Choose a 50-ohm antenna for 5725–5850MHz. A directional panel or horn works for fixed sites. For mobile use, an omni antenna may be better. Check VSWR before full power. A poor match can damage the module.

Power Supply Tips

Do not use an unregulated supply. Voltage above 29V may harm the unit. Use a fuse. Keep wires short. If you run from a vehicle, add filtering to reduce alternator noise.

Who Uses It

This module fits counter-UAV teams that need a ready 5.8GHz jamming path. Common uses:

  • Prison and airport protection

  • Portable inspection units

  • RF research

  • Custom anti-drone platforms

Pair it with a detector. The detector finds the drone. The module blocks the link. Need another band? Compare our other drone jammer modules.

Why This 20W GaN Jamming Module Stands Out

Many jammers need an external signal source. This one does not. The built-in high-speed sweep source saves space and wiring. The DC24–29V input and 2.5A max current are common in vehicle and battery systems. For counter-drone design context, see ITU unmanned aircraft resources. The small housing also helps where rack amplifiers will not fit.

Final Notes

The ETLD-JM5758G20 is a practical building block for 5725–5850MHz work. It offers 20W output, GaN efficiency, and a built-in sweep source in a small metal case. Confirm your frequency and power needs first. If 5725–5850MHz is right, this 20W GaN jamming module is ready. Proper grounding, cooling, and antenna choice will get the best results.

ParameterSpecificationNotes
Frequency Band5725~5850MHz5.8GHz UAV band
Output Power20WTypical
Output VSWR≤2.0Use matched antenna
Working VoltageDC24V~29VRegulated DC
Max Working Current2.5AAt 29V
Efficiency≥40%GaN design
Switch Control+5V or floating ON / ground OFFTTL-friendly
Output ConnectorSMA female50-ohm system
Jammer SourceBuilt-in high-speed sweep sourceNo external source
Dimensions115.5*46.5*21mmCompact housing
Weight0.21kgLightweight

What is the operating frequency of this module?

It works from 5725MHz to 5850MHz. That is a common 5.8GHz band for drone video and control.

Can this 20W GaN jamming module run from a 24V battery?

Yes, if the battery stays between 24V and 29V under load and can supply 2.5A. Use a regulated output or protection circuit.

Does the module include its own signal source?

Yes. It has a built-in high-speed sweep source. You do not need an external generator.

What connector does the RF output use?

The output is an SMA female connector. Match it with a 50-ohm antenna with an SMA male plug.

How is the module switched on and off?

A +5V signal or a floating pin turns it on. Grounding the pin turns it off.

Is the output power adjustable?

The listed output is 20W typical. The module does not list variable gain control, so expect full power when it is on.

What should I check before applying power?

Check polarity, voltage range, antenna match, and cooling. Reverse polarity or overvoltage can damage the module.

Can I mount it inside a sealed outdoor box?

Yes, but the box must handle heat. Use a metal enclosure and a thermal path. The module itself is not weatherproof.