What Is an 80W Jammer Module Used For?
An 80W jammer module is used in authorized counter-drone systems to disrupt specific RF links. Here is where it fits, and how to scope one.
80W GaN UAV jammer module ETLD-JM3436G80: 3400-3600MHz, DC24-29V, 10A max, ≥40% efficiency, SMA female, built-in sweep and VSWR protection.
80W GaN UAV jammer module ETLD-JM3436G80 is a high-power RF block for the 3400–3600MHz band. It combines an 80W GaN output stage with a built-in high-speed sweep source and absorption-type VSWR protection. Integrators get a self-contained module that needs only DC power and a simple switch signal. The SMA female output and 168.5 × 84.5 × 23mm metal housing suit fixed, vehicle, and rugged counter-drone systems.

This is not a finished jammer. It is an RF component for professional systems. The ETLD-JM3436G80 accepts DC power and a switch signal, then produces a swept 80W signal across 3400–3600MHz. That range covers many high-band drone control, video, and telemetry links.
GaN devices handle high power density and thermal stress well. In this module, the GaN stage delivers 80W typical output with VSWR ≤2.0. The design targets a 50-ohm path, so antenna matching matters. Poor matching raises reflected power and heat. Before full-power tests, check the antenna and use a dummy load. The 3.4–3.6GHz band is used by 5G and other services, so filtering and power control may be required. See FCC RF safety guidelines for general RF exposure information.
The internal high-speed sweep source moves energy across the band. That creates a wideband interference profile instead of a single tone. For drone links that may use different channels or hopping schemes, sweeping can be more effective than a fixed frequency. The module also includes absorption-type VSWR protection. This helps protect the output stage if the antenna match degrades. The sweep source is already inside, so the host controller does not need to generate an RF signal. If you need a lower band, check our 60W LoRa FPV jamming module.
The module runs from DC24V–29V and draws up to 10.0A at full load. Efficiency is ≥40%, which helps limit heat compared with lower-efficiency amplifiers. Even so, 80W continuous operation requires a heatsink or metal chassis. Use thermal paste or a thermal pad between the module base and the mounting surface. Keep airflow around the fins. In sealed enclosures, forced air may be necessary. Check current, temperature, and output power after 10–15 minutes of operation.
Switch control is simple: +5V or floating turns the module on; grounding turns it off. This logic works with microcontrollers, relays, or remote switches. The RF output is SMA female. The module measures 168.5 × 84.5 × 23mm and weighs about 0.55kg. That size fits vehicle, fixed-site, and rugged enclosures. Keep RF cables short and route them away from control lines. The larger case compared with lower-power modules helps spread heat.
This module is an RF component, not a consumer device. The integrator is responsible for antennas, cooling, power protection, and legal compliance. Jamming rules vary by country. In the United States, the FCC enforces strict rules on jammer use. The 3400–3600MHz band may also include licensed or safety-related services. Test in a shielded room or with a dummy load before going on air.
Common uses include high-band drone control denial, video link disruption, drone detection plus mitigation, border protection, convoy security, and RF research. This 80W GaN UAV jammer module also works as a lab source for high-band testing. Its built-in sweep source and VSWR protection make it practical for teams that want faster deployment and fewer external modules.
The ETLD-JM3436G80 offers 80W GaN output, 3400–3600MHz coverage, an internal sweep source, and absorption-type VSWR protection in a compact metal package. It is a straightforward building block for counter-UAV and high-band RF denial systems. If you need a different band or power level, review our other drone jammer modules or contact us.
| Parameter | Specification | Notes |
| Working frequency | 3400–3600MHz | Covers high-band UAV and video links |
| Output power | 80W | Typical RF output |
| Output VSWR | ≤2.0 | Designed for 50-ohm systems |
| Working voltage | DC24V–29V | Regulated supply recommended |
| Maximum current | 10.0A | At full load |
| Efficiency | ≥40% | Lower heat load |
| Switch control | +5V or floating = ON; grounding = OFF | Simple logic interface |
| Output connector | SMA female | Standard RF interface |
| Jammer source | Built-in high-speed sweep source | No external source required |
| VSWR protection | Built-in absorption-type VSWR protection | Helps protect output stage |
| Dimensions | 168.5 × 84.5 × 23 mm | L × W × H |
| Weight | 0.55 kg | Approx. |